Inpa And Ncs Expert For Windows 10

Posted on by



Here provide INPA windows 7 download link here. INPA Windows 7 Download Software version: 5.0.2 (tested ok) VXDAS team also glad to share the installation guide for INPA software with Win7 32bit. Check details below: We suggest to start with a fresh Windows 7 32 bit to get the BMW INPA software done, because this can help to collect necessary. 1.Goto Desktop/INPA/INPA and right-click the file ‘Step 2 Install INPA.exe’.Set up for compatibility as mentioned in Phase 6,step 1. 2.The Destination Path should be ‘C:temp’, leave as it is and click ‘Next’. 3.Choose ‘English’ and select ‘Continue’ and ‘Continue’. 4.Select ‘C:’ and then ‘Continue’.

I want to share Kpl BMW Standard tools and very easy way to install: just one click. Inpa support F01-F02-F10.F25.F30 and all older Models also NCS. Dec 08, 2016 Download BMW INPA Windows 10 for K+DCAN Cable December 8, 2016 sales Auto Diagnostic Tools 0 Here is an easy way to install BMW Standard Tools to work with K+DCAN USB cables, developed by dallas.dainers and proved to be done in less than 15 min depending on the processing power of your machine. Salut, A reusit cineva sa ruleze fara erori INPA /NCS EXPERT direct win 10 x64 ver 1803. Poate sa ma ajute si pe mine cineva?

BMW INPA Windows XP installation guide… Here you go…The inpa ediabas software provided and the procedures proposed are intended for personal, educational and experimental use.

Note: this how-to guide here especially for Windows XP users only

For users with Windows Vista, Win 7 (32/64bit), Win 8, Win10, please go to

InpaInpa And Ncs Expert For Windows 10

bmw inpa / ediabas interface: INPA K+DCAN usb cable

The version 2016 cable is great, designed with the FT232RQ chip and a switch to turn LEFT is for 7 pin or RIGHT for 8 pin (8 pin for K-LINE communication (old DCAN cables cannot do it) for BMW from 1998 to 2008)

k+dcan cable software: INPA 5.0.2

Running system: Windows xp

k+dcan usb interface software installation:

Step 1: Delete ALL versions of INPA-ADS from your computer or remane all INPA-ADS folders.

For example: remane INPA into “_INPA”, EDIABAS into “_EDIABAS” and so on.

Step 2: Open folder Step_1 in the root of the CD-disk comes with the inpa cable

Copy folder EC-APPS onto disk С:

Step 3: Run file Step_1NFSEntpacktdisk1SETUP.EXE

While installing, choose User Mode

Further choose in opening windows:

  1. Parametrieren einer neuen Konfiguration ohne Daten
  2. 2. OBD
  3. Kein API-TRACE
  4. Kein IFH-TRACE
  5. Komfort (.IPO)

! RE-BOOT YOUR Computer !

Step 4: Run file Step_2INSTALLInstprog.exe

  1. Choose ENGLISH, press Continue, then press Continue again
  2. While choosing the HDD disk for initial setup

DO NOT change the location C:.

INPA installation must be on drive С: ONLY !

  1. Choose configuration BMW Group Rectification programs UK, press Continue.
  2. Activate all spare boxes with : EDIABAS 6.4.3 – UPDATE, INPA 5.0.1 – UPDATE,

NCS Expert 3.0.8 – Complete

  1. Press Continue.

Step 5: Run file Step_3INSTALLInstprog.exe

  1. Choose ENGLISH, press Continue, then Continue again
  2. While choosing the HDD disk for initial setup.

DO NOT change the location C:.

INPA installation must be on drive С: ONLY !

Inpa and ncs expert for windows 10 64
  1. Choose configuration BMW Group Rectification programs UK, press Continue.
  2. Activate all spare boxes with: INPA 5.0.1 – UPDATE, NCS Expert 3.0.8 – UPDATE
  3. Press Continue.

Step 6: Find the file С:EC-APPSINPACFGDAT named inpa.ini

and replace it with the file inpa.ini that is in the root directory of CD-disk given.

Step 7: Plug the Adapter into spare USB-port and install drivers manually from the folder Driver_D_CAN_USB using Driver Wizard of your Windows XP-Service Pack-2

Step 8: Use following pictures for help.

Step 9: In Advanced field change number of COM-port to the value from 2 to 4.

Also change the value of Latency Timer from 16 to 1. Remember the number of the COM-port choosen !

Ncs

Step 10: In the file EDIABAS.INI “Interface = STD:OBD” must be chosen

(That is default parameter after installing from CD-disk given. Check the parameter if you use another version of INPA !)

Step 11: In the file C:WindowsOBD.INI put the number of USB-COM-port to the value that you remembered in the step_3

Step 12: Run from CD-disk a file Driver_D_CAN_USBOBDSetup.exe

Step 13:RE-BOOT your Computer !

Step 14: Use the following order of using K+DCAN USB cable adapter:

– Plug the Adapter into spare USB-port

– Plug the Adapter into OBD-II connector of BMW

– Turn the Ignition into ON position

– Rune the soft INPA with file С:EC-APPSINPABINinpaload.exe

– Choose the model of BMW and type of modul you want to see

Inpa And Ncs Expert For Windows 10

– Close the soft and disconnect the Adapter from USB-port each time you change the car connected

N.B.:

K+dcan adapter is already configured to work with BMW both K-line and CAN-bus.

Modes of configuration file D-CAN.exe, that is on the CD-disk given in the folder

_D_CAN_USB as follows:

BMW INPA Cable Configuration:

For configuration interface:

Connect USB cable

Inpa And Ncs Expert On Windows 10

Run D-CAN.EXE and setup CAN BUS mode.

LED should OFF

Don’t use USB Extender cable, directly connect interface to computer.

Inpa Ncs Expert Software

Who Viewed This Article Also Views: